User's Manual

omconfig: Managing Components Using the Instrumentation Service 87
attribute=
serialport2
setting=off | auto | com2
|com4
off: Disables serial port 2.
auto: Maps serial port 2 to a COM port.
com2: Maps serial port 2 to COM port 2.
com4: Maps serial port 2 to COM port 4.
attribute=speaker setting=on | off on: Enables the speaker.
off: Disables the speaker.
attribute=
cputurbomode
setting=enabled |
disabled
CPU turbo mode can increase the CPU
frequency when your system is operating
below the thermal, power, or current limits.
enabled: Enables CPU Turbo Mode.
disabled: Disables CPU Turbo Mode.
attribute=uausb setting=on | backonly |
off
on: Enables the user-accessible USB port(s)
backonly: Enables only the user accessible
USB port(s) located at the back of the system.
off: Disables the user-accessible USB port(s).
attribute=usb setting=enabled |
disabled
enabled: Enables the USB port(s).
disabled: Disables the USB port(s).
NOTE: Depending on your system’s hardware,
only one of the two attributes usb and usbb is
available for configuring the USB port(s).
attribute=usbb setting=enabled |
enabledwithbios|
disabled
enabled: Enables the USB port(s) during
system boot, without BIOS support.
enabledwithbios: Enables the USB port(s)
during the system boot, with BIOS support.
disabled: Disables the USB port(s) during
system boot.
NOTE: Depending on your system’s hardware,
only one of the two attributes usb and usbb is
available for configuring the USB port(s).
Table 4-3. BIOS Setup Settings (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description