User's Manual

omconfig: Managing Components Using the Instrumentation Service 77
Help With the omconfig Command
Use the omconfig -? command to get a list of the available commands for
omconfig.
Use omconfig <command level 2> -? to get help on the about, chassis,
preferences, and system’s level 2 commands. The following information on
omconfig system -? applies equally to getting help for the omconfig chassis
command.
Use the omconfig system -? command to get a list of the available commands
for omconfig system.
Use the omconfig preferences -? command to get a list of the available
commands for omconfig preferences, such as cdvformat, which is the custom
delimiter format (cdv). Type the following command to display the list of
delimiter values for the cdv:
omconfig preferences cdvformat -?
Use a command of the form omconfig system <command level 3> -? to get a
list of the parameters you must use to execute a particular omconfig system
command. For example, the following commands produce a list of valid
parameters for omconfig system alertaction and omconfig system shutdown:
omconfig system alertaction -?
omconfig system shutdown -?
volts P, A Sets warning threshold
values by default or
value.
NOTE: You cannot
change threshold
values on ESM3 and
PowerEdge x8xx
systems.
storage See "Using the Storage
Management Service."
Table 4-2. omconfig Command Level 1, Level 2, and Level 3 (continued)
Command Level 1 Command Level 2 Command Level 3 User Privilege
Required
Use