User's Manual

76 omconfig: Managing Components Using the Instrumentation Service
leds P, A Specifies when to flash
a chassis fault LED or
chassis identification
LED, and allows you to
clear the LED for the
system's hard drive.
memorymode A Enables or disables the
spare bank and
mirroring memory
modes, and also specify
which mode to use.
pwrmanagement P, A Allows you to choose
between maximum
power economy and
optimized
performance of the
system.
pwrmonitoring P, A Configures power
consumption
information and
thresholds.
remoteaccess A Configures remote
access information.
temps P, A Sets warning threshold
values by default or
value.
NOTE: You cannot
change threshold
values on ESM3 and
PowerEdge x8xx
systems.
Table 4-2. omconfig Command Level 1, Level 2, and Level 3
(continued)
Command Level 1 Command Level 2 Command Level 3 User Privilege
Required
Use