User's Manual
omconfig: Managing Components Using the Instrumentation Service 75
chassis/
mainsystem
biossetup A Configures the
behavior of specific
system components
controlled by the
BIOS.
bmc A Configures remote
access information.
NOTE: This command
is phased-out in this
releases. It is replaced
by the remoteaccess
command.
fans P, A Configures fan probe
warning thresholds by
default or by value.
NOTE: You cannot
change threshold
values on embedded
server management
(ESM3) and Dellâ„¢
PowerEdgeâ„¢ x8xx
systems.
fancontrol P, A Allows you to optimize
fan speed for
maximum cooling or
quiet operation.
frontpanel A Configures the Power
button and
Nonmasking Interrupt
(NMI) button if
present on the system.
info P, A Allows you to set an
initial value, or to edit
the value for, asset tag
or chassis name.
Table 4-2. omconfig Command Level 1, Level 2, and Level 3
(continued)
Command Level 1 Command Level 2 Command Level 3 User Privilege
Required
Use