User's Manual

72 omconfig: Managing Components Using the Instrumentation Service
Conventions for Parameter Tables
When listing the parameters that a command can take, the parameters are
listed in alphabetical order instead of the order in which they appear in the
command line interface.
The symbol |, often called pipe, is the logical exclusive or operator. For example,
enable | disable means that you can enable or disable the component or
feature, but you cannot simultaneously enable and disable the component or
feature.
omconfig Command Summary
NOTE: Although this section lists all possible omconfig commands, the commands
available on your system depend on your system configuration. If you try to get help
or execute a command for a component not installed on your system, Server
Administrator issues a message that the component or feature is not found on
the system.
Table 4-2 is a high-level summary of the omconfig command. The columns
titled "Command level 2" and "Command level 3" list the major arguments
that can be used with omconfig. "User privilege required" refers to the type of
privilege you need to perform the command, where U=User, P=Power User,
and A=Administrator. "Use" is a very general statement about the actions
that can be performed using omconfig. More details about syntax and use of
the command appear later in this section.
Table 4-2. omconfig Command Level 1, Level 2, and Level 3
Command Level 1 Command Level 2 Command Level 3 User Privilege
Required
Use
omconfig
about U, P, A Shows version number
and properties for the
Server Administrator
program.
details=true U, P, A Displays information
for all of the Server
Administrator
programs that are
installed.