User's Manual

omreport: Viewing System Status Using the Instrumentation Service 39
Parallel port address Displays whether the address is located on LPT1, LPT2, and LPT3,
or if it is disabled.
Parallel port mode Displays the setting associated with the parallel port.
Primary SCSI Displays whether the device is on or off.
RAID on motherboard Displays whether RAID-on-motherboard is detected as a
RAID device, a SCSI device, or if the device is disabled during
system boot.
RAID Channel A Displays whether RAID-on-motherboard Channel A is detected as a
RAID device or a SCSI device.
RAID Channel B Displays whether RAID-on-motherboard Channel B is detected as a
RAID device or a SCSI device.
SATA
Serial Port 1 Displays whether serial port 1 is mapped to a COM port, a
COM port 1, a COM port 3, a COM1 BMC, a BMC Serial, a BMC
NIC, a BMC RAC, or is disabled.
Serial Port 2 Displays whether serial port 2 is mapped to a COM port, a
COM port 2, a COM port 4, or is disabled.
Speaker Displays whether the speaker is on or off.
USB or USBB Displays whether the USB port is enabled or disabled.
Secondary SCSI Displays whether the device is enabled or disabled.
Serial Communications
Serial Communications Displays whether COM port 1 and COM port 2 are off or on with or
without console redirection.
Console Redirection
After Boot
Displays whether console redirection after system reboot is enabled
or disabled.
External Serial Connector Displays whether the external serial connector is mapped to Serial
Device 1 or Serial Device 2 or a Remote Access Device.
Console Redirection
Failsafe Baud Rate
Displays the setting for console redirection failsafe baud rate.
Serial Address Select Displays port address for the serial devices.
Table 3-3. BIOS Setup Parameters
(continued)
Parameters Description