User's Manual

38 omreport: Viewing System Status Using the Instrumentation Service
NIC 1 Displays whether the first NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
NIC 2 Displays whether the second NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
NIC 3 Displays whether the third NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
NIC 4 Displays whether the fourth NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
Trusted Platform Module
(TPM) Security
Displays whether Trusted Platform Module is off, on with pre-boot
measurements, or on without pre-boot measurements.
Internal USB Displays whether internal USB is enabled or disabled.
Operating System
Watc hdog Timer
Displays whether the operating system watchdog timer is enabled
or disabled.
Internal SD Card Displays whether the internal SD card is enabled or disabled.
Bezel Displays whether the bezel removal intrusion check during system
reboot is enabled or disabled.
Console Redirection Displays if the BIOS screen is redirected over a particular serial port
or if it is turned off.
Diskette Displays whether the diskette is disabled, auto enabled, or
read-only.
Demand Based Power
Management (DBS)
Displays whether DBS is enabled or disabled on the system.
Embedded Hypervisor Displays whether the embedded hypervisor is enabled or disabled.
IDE Displays whether the drive is enabled or disabled.
IDE Primary Drive 0 Displays whether the device is automatically detected and enabled
or if the device is disabled.
IDE Primary Drive 1 Displays whether the device is automatically detected and enabled
or if the device is disabled.
Intrusion Displays whether the intrusion check is enabled or disabled during
system boot.
Mouse Displays whether the mouse is enabled or disabled.
Optical Drive Controller Displays whether the optical drive controller is enabled or disabled.
Table 3-3. BIOS Setup Parameters
(continued)
Parameters Description