User's Manual
omreport: Viewing System Status Using the Instrumentation Service 31
storage U, P, A See "Using the Storage Management
Service."
system/serv
ermodule
U, P, A Shows a high-level summary of system
components.
alertaction U, P, A Shows warning and failure threshold
values, as well as actions configured when
an essential component detects a warning
or failure state.
alertlog U, P, A Allows the administrator to display the
alert log.
assetinfo U, P, A Shows the cost of ownership information
for your system.
cmdlog U, P, A Allows the administrator to display the
command log.
esmlog U, P, A Allows the administrator to display the
hardware log.
events U, P, A Shows the system’s Simple Network
Management Protocol (SNMP) event
settings.
operatingsystem U, P, A Shows the name and version of your
operating system.
pedestinations U, P, A Shows destinations where alerts for
platform events are configured to be sent.
platformevents U, P, A Shows the system’s response for each
listed platform event.
recovery P, A Shows how your system is configured to
respond to a hung operating system.
shutdown P, A Shows how the shutdown action is to be
performed.
Table 3-2. Command Level 1, Level 2, and Level 3 for omreport
(continued)
Command
Level 1
Command
Level 2
Command
Level 3
User
Privilege
Required
Use