User's Manual

omconfig system or servermodule assetinfo: Editing Cost of Ownership Values 143
Adding System Information
System information includes the primary user of the system, the phone
number for the primary user, and the location of the system. Table 5-11
shows the valid parameters for adding system information.
Example Command for Adding System Information
To provide a value for a system parameter, type a command of the form:
omconfig system assetinfo info=system <name=value pair 2> or
omconfig servermodule assetinfo info=system <name=value pair 2>.
For example, type:
omconfig system assetinfo info=system location=
firstfloor
or
omconfig servermodule assetinfo info=system
location=firstfloor
The following message appears:
Asset information set successfully.
You can enter more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For
an example, see "Example Commands for Adding Acquisition Information."
Table 5-11. omconfig system assetinfo info=system/omconfig servermodule
assetinfo info=system
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description
omconfig
system/server
module
assetinfo
info=
system
location=<text> Location of the system.
primaryphone=<n> Phone number of the
system's primary user.
primaryuser=<user> Primary user of the
system.