User's Manual

omconfig: Managing Components Using the Instrumentation Service 101
config=serial baudrate=9600 | 19200 |
38400 | 57600 | 115200
9600: Sets the connection speed to 9600 bits
per second.
19200: Sets the connection speed to 19200
bits per second.
38400: Sets the volatile and non-volatile
connection speed to 38400 bits per second.
57600: Sets the volatile and non-volatile
connection speed to 57600 bits per second.
115200: Sets the volatile and non-volatile
connection speed to 115200 bits per second.
NOTE: Baud rates of 9600 and 19200 are
supported on PowerEdge 1800, 1850, 2800, and
2850 systems.
Baud rates of 19200, 38400, and 57600 are
supported on PowerEdge x9xx systems.
Baud rate of 115200 is supported on certain
systems that have a DRAC 5 installed.
Baud rate of 19200, 57600, and 115200 are
supported on xx0x systems that have iDRAC6
installed.
flowcontrol=none | rtscts none: No control over the flow of
communication through the serial port.
rtscts: RTS is ready to send and CTS is clear
to send.
Table 4-12. omconfig chassis remoteaccess/omconfig mainsystem
remoteaccess (continued)
name=value pair 1
config=
name=value pair 2 Description