User's Manual

100 omconfig: Managing Components Using the Instrumentation Service
ipsource=static | dhcp |
systemsoftware
static: Static if the IP address of the BMC
LAN interface is a fixed, assigned IP address.
dhcp: DHCP if the source of the IP address
of the BMC LAN interface is the dynamic
host configuration protocol.
systemsoftware: System software if the source
of the IP address of the BMC LAN interface
is from the system software.
NOTE: Not all commands may be supported
on your system.
ipsourcev6=static | auto static: IPv6 address source is set to static.
auto: IPv6 address source is set to auto.
config=nic
(continued)
privilegelevel=administrator
| operator | user
administrator: Sets the maximum privilege
level that can be accepted on a LAN channel
to Administrator.
operator: Sets the maximum privilege level
that can be accepted on a LAN channel
to Operator.
user: Sets the maximum privilege level that
can be accepted on a LAN channel to User.
prefdnsserverv6=<value> Validates the preferred DNS server for
configuration.
subnet=Subnet subnet: Sets a subnet mask if you have
selected static as the IP address source for the
BMC LAN interface.
vlanenable=true | false true: Enables the virtual LAN identification.
false: Disables the virtual LAN identification.
vlanid=number number: Virtual LAN identification in the
range of 1 to 4094.
vlanpriority=number number: Priority of virtual LAN
identification in the range of 0 to 7.
Table 4-12. omconfig chassis remoteaccess/omconfig mainsystem
remoteaccess (continued)
name=value pair 1
config=
name=value pair 2 Description