SNMP Reference Guide

112 Chassis Information Group
identifyChassis(8)
The chassis identification control’s
LEDs may be returned to (normal) 0,
or (identify chassis) 1.
identifyChassisAndEnable
(10)
The chassis identification control’s
LEDs may be returned to normal
(a binary 0 value), or identify chassis
and enabled (a binary 1 value).
Table 5-11. Host Control Capabilities
Variable Name:
DellHostControlCapabilities
NOTE:
An operator can manually cause these actions using SNMP.
Data Type:
Integer
Possible Data Values Meaning of Data Value
manualRebootCapable(1) The operator can reboot capable host.
manualPowerOFFCapable(2) The operator can power off capable host.
manualPowerCycleCapable(4) The operator can power-cycle capable
host.
manualAllExceptOperating
SystemShutdownCapable(7)
The operator can reboot and power off
capable host.
manualOperatingSystemShut
downCapable(8)
The operator can shut down the
operating-system–shutdown capable host.
manualFullyCapable(15) The operator can reboot, power on and off
the power-cycle capable host, and shut
down the operating-system–shutdown
capable host.
Table 5-10. Chassis Identification Control Settings (continued)
Variable Name:
DellChassisIdentifyControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
book.book Page 112 Tuesday, January 27, 2009 12:37 PM