Users Guide

Working with Remote Access Controller 91
Additional Configuration for iDRAC
You can configure the IPv4 and IPv6 properties using the Additional
Configuration tab. To do this:
1
Click the Modular Enclosure → System/Server Module → Main System
Chassis/Main System
→ Remote Access object.
2 Click the Configuration tab.
3 Click Addtional Configuration.
4 Configure the IPv4 and IPv6 properties as Enabled or Disabled .
5 Click Apply Changes.
Configuring Remote Access Device Users
Remote access device useres can be configured using the Remote Access
page. To access this page:
1
Click the Modular Enclosure → System/Server Module → Main System
Chassis/Main System
→ Remote Access object.
2 Click the Users tab.
The
Remote Access Users window displays information about users that
can be configured as BMC/iDRAC users.
3 Click User ID to configure a new or existing BMC/iDRAC user.
The
Remote Access User Configuration window allows you to configure a
specific BMC/iDRAC user.
4 Specify the following general information:
• Select
Enable User to enable the user.
• Enter the name for the user in the
User Name field.
• Select the
Change Password check box.
• Enter a new password in the
New Password field.
• Re-enter the new password in the
Confirm New Password field.
book.book Page 91 Monday, March 9, 2009 2:15 PM