Users Guide

90 Working with Remote Access Controller
• New Line Sequence
• Input New Line Sequence
8 Click Apply Changes .
9 Click Back To Serial Port Configuration Window to go to back to the
Serial Port Configuration window.
Configuring the Remote Access Device to use
a Serial Over LAN Connection
You can configure the BMC/iDRAC for communication over a serial over
LAN (SOL) connection. To do this:
1
Click the Modular Enclosure → System/Server Module → Main System
Chassis/Main System
→ Remote Access object.
2 Click the Configuration tab.
3 Click Serial Over LAN .
The
Serial Over LAN Configuration window appears.
4 Configure the following details:
• Enable Serial Over LAN
•Baud Rate
• Minimum Privilege Required
5 Clic k Apply Changes.
6 Click Advanced Settings to further configure BMC.
7 In the Serial Over LAN Configuration Advanced Settings window, you
may configure the following information:
• Character Accumulate Interval
• Character Send Threshold
8 Click Apply Changes.
9 Click Go Back to Serial Over LAN Configuration to return to the Serial
Over LAN Configuration
window.
book.book Page 90 Monday, March 9, 2009 2:15 PM