Users Guide

86 Working with Remote Access Controller
• SOL Enabled
• MAC Address
IPv4 Address
• IP Address Source
• IP Address
• IP Subnet
•IP Gateway
IPv6 Address
• IP Address Source
• IPv6 Address 1
• Default Gateway
• IPv6 Address 2
• Link Local Address
• DNS Address Source
• Preferred DNS Server
• Alternate DNS Server
NOTE: You will be able to view IPv4 and IPv6 address details only if you enable the
IPv4 and IPv6 address properties under Additional Configuration in the Remote
Access tab.
Configuring the Remote Access Device to use a
LAN Connection
NOTE: The LAN configuration fields are displayed as read-only if they are
configured as
disabled for inband users.
You can configure the remote access device for communication over a LAN
connection. To do this:
1
Click the Modular Enclosure → System/Server Module → Main System
Chassis/Main System
→ Remote Access object.
2 Click the Configuration tab.
book.book Page 86 Monday, March 9, 2009 2:15 PM