Users Guide

Server Administrator Services 77
Under the Additional Configuration tab you will be able to either enable or
disable IPv4/IPv6 properties.
NOTE: Enabling/disabling IPv4/IPv6 is possible only in a dual stack environment
(where both the IPv4 and IPv6 stacks are loaded).
Users
Subtab: Users
Under the Users tab, you can modify the remote access user configuration.
You can add, configure, and view information about Remote Access
Controller users.
NOTE: On the Dell PowerEdge x9xx systems:
• Ten user IDs are displayed. If a DRAC card is installed, sixteen
user IDs are displayed.
• Serial Over LAN Payload column is displayed.
Slots
Click the Slots object to manage the connectors or sockets on your system
board that accept printed circuit boards, such as expansion cards. The Slots
object action window has the Properties tab.
Properties
Subtab: Information
Under the Properties tab, you can view information about each slot and
installed adapter.
Temperatures
Click the Temperatures object to manage your system temperature in order to
prevent thermal damage to your system’s internal components. Server
Administrator monitors the temperature in a variety of locations in your
system's chassis to ensure that temperatures inside the chassis do not become
too high. The Temperatures object action window can have the following tabs,
depending on the user's group privileges: Properties and Alert Management.
Properties
Subtab: Temperature Probes
book.book Page 77 Monday, March 9, 2009 2:15 PM