Users Guide

Server Administrator Services 75
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want
to be performed in the event that a system power returns a warning or
failure value.
• Configure Platform Event Alert destinations for IPv6 addresses.
• View current SNMP trap alert thresholds and set the alert threshold levels
for system power watts. The selected traps will be triggered if the system
generates a corresponding event at the selected severity level.
NOTE: The System Peak Power trap will generate events only for Informational severity.
Processors
Click the Processors object to manage your system's microprocessor(s).
A processor is the primary computational chip inside a system that controls
the interpretation and execution of arithmetic and logic functions. The
Processors object action window can have the following tabs, depending on
the user's group privileges: Properties and Alert Management.
Properties
Subtab: Information
Under the Properties tab, you can view information about your system's
microprocessor(s) and access detailed capabilities and cache information.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want to
be performed in the event that a processor returns a warning or failure value.
• View current SNMP trap alert thresholds and set the alert threshold levels
for processors. The selected traps will be triggered if the system generates a
corresponding event at the selected severity level.
Remote Access
Click the Remote Access object to manage the Baseboard Management
Controller (BMC) or Integrated Dell Remote Access Controller (iDRAC)
features and Remote Access Controller features.
book.book Page 75 Monday, March 9, 2009 2:15 PM