Users Guide

72 Server Administrator Services
Memory
Click the Memory object to manage your system's memory devices. Server
Administrator monitors the memory device status for each memory module
present in the monitored system. Memory device prefailure sensors monitor
memory modules by counting the number of ECC memory corrections.
Server Administrator also monitors memory redundancy information if your
system supports this feature. The Memory object action window can have the
following tabs, depending on the user's group privileges: Properties and Alert
Management.
Properties
Subtab: Memory
Under the Properties tab, you can view memory attributes, memory device
details, and memory device status.
NOTE: If a system with spare bank memory enabled enters a redundancy lost state,
it may not be apparent which memory module is the cause. If you cannot determine
which DIMM to replace, see the switch to spare memory bank detected log entry in
the ESM system log to find which memory module failed.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want
to be performed in the event that a memory module returns a warning or
failure value.
• View current SNMP trap alert thresholds and set the alert threshold levels
for memory modules. The selected traps will be triggered if the system
generates a corresponding event at the selected severity level.
book.book Page 72 Monday, March 9, 2009 2:15 PM