Users Guide

116 Instrumentation Service
Configuration/Information
Under the Configuration/Information tab, you can view the current status
and property information of the enclosure power supplies. The status is
visually indicated with the icons described in "Storage Component Severity."
Property information includes name, state, and part number.
Temperatures
Click the Temperatures object to view information about the enclosure
temperature probes. The Temperatures object action window can have the
following tab, depending on the user’s group privileges:
Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status
and property information of the enclosure temperature probes. The status is
visually indicated with the icons described in "Storage Component Severity."
Property information includes name, state, and reading (current
temperature). The minimum and maximum values set for the temperature
probes’ Warning and Failure thresholds are also displayed under this tab.
Virtual Disks
Click the Virtual Disks object to view information about the virtual disks
configured on the controller. The Virtual Disks object action window can
have the following tab, depending on the user’s group privileges:
Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the property
information of the virtual disks configured on the controller. Property
information includes name, state, and layout (RAID level). The read, write,
and cache policy and stripe size are also displayed. You can also execute
virtual disk tasks in this tab.
Firmware/Driver Versions
Click the Firmware/Driver Version object to view information about the
version of the driver and firmware that are currently installed on the
controller. The firmware and driver properties can vary depending on the
model of the controller.
book.book Page 116 Monday, July 7, 2008 2:59 PM