SNMP Reference Guide

Traps 659
Chassis intrusion
state:
<
Intrusion state >
Specifies the chassis intrusion state (open or
closed), for example:
Chassis intrusion state: Open
Chassis location:
<
Name of chassis >
Specifies the name of the chassis that
generated the message, for example:
Chassis location: Main System
Chassis
Configuration error
type:
<type of
configuration error>
Specifies the type of configuration error that
occurred, for example:
Configuration error type:
Revision mismatch
Current sensor value
(in Amps): <
Reading >
Specifies the current sensor value in amps, for
example:
Current sensor value: 7.853
Date and time of
action: <
Date and
time
>
Specifies the date and time that an automatic
server recovery action was performed, for
example:
Date and time of action:
Fri May 30 23:55:44 2003.
Device location:
<Location in chassis>
Specifies the location of the device in the
specified chassis, for example:
Device location: Mem Card A
Discrete current state:
<State>
Specifies the state of the current sensor, for
example:
Discrete current state: Good
Discrete temperature
state:
<State>
Specifies the state of the temperature sensor,
for example:
Discrete temperature state:
Good
Table 26-1. Trap Description Reference (continued)
Description Line Item Explanation
book.book Page 659 Tuesday, August 5, 2008 9:15 AM