SNMP Reference Guide

20 Introduction
The Server Administrator Instrumentation MIB structures its MIB objects
into groups of scalar objects or MIB tables that provide related information.
Table 1-2 describes each Server Administrator Instrumentation MIB group
and lists the MIB group number assigned to the MIB group.
The Server Administrator Instrumentation MIB groups are identified by
the SNMP OID 1.3.6.1.4.1.674.10892.1.<MIB group number>, where
<MIB group number> is the MIB group number assigned to the MIB group.
See the relevant section for more information about the MIB objects defined
in a MIB group.
Table 1-2. Server Administrator Instrumentation MIB Sections
in This Guide
Section Topics MIB Group
Numbers
2 Instrumentation MIB Version Group — defines version
numbers of the Instrumentation MIB
1
3 Systems Management Software Group — defines information
about the systems management software and the supported
systems management standards
100
4 System State Group — defines status, state, and redundancy
for a system and its components
200
5 Chassis Information Group — defines chassis types, events,
and indicators
300
6 Operating System Group — defines variables for name,
version, service pack, and other information about a system’s
operating system
400
7 System Resource Group — defines variables for input/output
ports, memory, interrupts, and direct memory access
500
8 Power Group — defines variables for power units, power
supplies, and their current and voltage probes
600
9 Thermal Group — defines variables for temperature probes
and cooling devices
700
10 User Security Group — defines variables for creating and
modifying user accounts
800
11 Remote Flash BIOS Group — defines variables for updating
the system’s BIOS remotely
900
book.book Page 20 Tuesday, August 5, 2008 9:15 AM