Messages Reference Guide

Storage Management Message Reference 185
2299 Bad PHY %1 Critical /
Failure /
Error
Cause: There is a problem
with a physical connection
or PHY. The %1 indicates a
substitution variable. The
text for this substitution
variable is displayed with
the alert in the Alert Log
and can vary depending on
the situation.
Action: Contact Dell
technical support.
Clear Alert
Number:
None.
Related Alert
Number:
None.
LRA Number:
2091
854
2300 The
enclosure is
unstable.
Critical /
Failure /
Error
Cause: The controller is
not receiving a consistent
response from the
enclosure. There could be
a firmware problem or an
invalid cabling
configuration. If the cables
are too long, they will
degrade the signal.
Action: Power down all
enclosures attached to the
system and reboot the
system. If the problem
persists, upgrade the
firmware to the latest
supported version. You can
download the most current
version of the driver and
firmware from
support.dell.com.
Make sure the cable
configuration is valid.
See the hardware
documentation for valid
cabling configurations.
Clear Alert
Number:
None.
Related Alert
Number:
None.
LRA Number:
2091
854
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Related Alert
Information
SNMP
Trap
Numbers