Users Guide

98 Instrumentation Service
Connector
Click the Connector object to view information about the connector and the
enclosure or backplane attached to the connector. The Connector object
action window can have the following tabs, depending on the user’s group
privileges: Health and Configuration/Information.
Health
Under the Health tab, you can view the current status of the connector and
the enclosure or backplane attached to the connector. The status is visually
indicated with the icons described in "Storage Component Severity."
Configuration/Information
Under the Configuration/Information tab, you can view the property
information of the connector and the enclosure or backplane attached to the
connector. You can also execute connector tasks in this tab.
Enclosure or Backplane
Click the Enclosure or Backplane object to view information about the
physical disks, temperature probes, and other components attached to the
enclosure or backplane. The Enclosure or Backplane object action window
can have the following tabs, depending on the user’s group privileges: Health
and Configuration/Information.
Health
Under the Health tab, you can view the current status of physical disks and
other components attached to the enclosure or backplane. For example, the
status of an enclosure’s fans, power supplies, temperature probes, and so on is
displayed in this tab. The status of physical disks attached to the backplane is
also displayed here. The status is visually indicated with the icons described
in "Storage Component Severity."
Configuration/Information
Under the Configuration/Information tab, you can view the property
information of the physical disks, temperature probes, EMMs (Enclosure
Management Modules) and other components attached to the enclosure or
backplane. For enclosures, you can also execute enclosure tasks in this tab.