Users Guide

Instrumentation Service 93
Users
Subtab: Users
Under the Users tab, you can modify the remote access user configuration.
You can add, configure, and view information about Remote Access
Controller users.
NOTE: On the Dell PowerEdge x9xx systems:
• Ten user IDs are displayed. If a DRAC card is installed, sixteen user
IDs are displayed.
• Serial Over LAN Payload column is displayed.
Slots
Click the Slots object to manage the connectors or sockets on your system
board that accept printed circuit boards, such as expansion cards. The Slots
object action window has the Properties tab.
Properties
Subtab: Information
Under the Properties tab, you can view information about each slot and
installed adapter.
Temperatures
Click the Temperatures object to manage your system temperature in order to
prevent thermal damage to your system’s internal components. Server
Administrator monitors the temperature in a variety of locations in your
system's chassis to ensure that temperatures inside the chassis do not become
too high. The Temperatures object action window can have the following tabs,
depending on the user's group privileges: Properties and Alert Management.
Properties
Subtab: Temperature Probes
Under the Properties tab, you can view the current readings and status for
your system's temperature probes and configure minimum and maximum
values for temperature probe warning threshold.
NOTE: Some temperature probe fields differ according to the type of firmware your
system has: BMC or ESM. Some threshold values are not editable on BMC-based
systems. When assigning probe threshold values, Server Administrator sometimes
rounds the minimum or maximum values you enter to the closest assignable value.