Users Guide

32 Setup and Administration
Enabling SNMP Set Operations
SNMP Set operations must be enabled on the Server Administrator system to
change Server Administrator attributes using IT Assistant.
1
Open the Computer Management window.
2 Expand the Computer Management icon in the window, if necessary.
3 Expand the Services and Applications icon, and then click Services .
4 Scroll down the list of services until you find SNMP Service , right-click
SNMP Service , and click Properties.
The SNMP Service Properties window appears.
5 Click the Security tab to change the access rights for a community.
6 Select a community name in the Accepted Community Names list, and
click
Edit .
The
SNMP Service Configuration window appears.
7 Set the Community Rights to READ WRITE or READ CREATE , and
click
OK .
The
SNMP Service Properties window appears.
8 Click OK to save the changes.
Configuring Your System to Send SNMP Traps to a Management Station
Server Administrator generates SNMP traps in response to changes in the
status of sensors and other monitored parameters. You must configure one or
more trap destinations on the Server Administrator system for SNMP traps to
be sent to a management station.
1
Open the Computer Management window.
2 Expand the Computer Management icon in the window, if necessary.
3 Expand the Services and Applications icon and click Services .
4 Scroll down the list of services until you find SNMP Service , right-click
SNMP Service , and click Properties .
The
SNMP Service Properties window appears.