Users Guide
28 Setup and Administration
• After the connection services are restarted and the changes do not take
effect for
/etc/omarolemap
file refer to command log for the errors.
• When
omarolemap
file is copied from one machine to another machine,
file permissions and the entries of the file needs to be rechecked.
• Prefix the
Group Name
with
+
.
• Server Administrator uses the default operating system user privileges, if
there are duplicate entries of user names or user groups along with same
<Host_Name>
.
•
Space
can also be used as a delimiter for columns instead of
[Tab]
Disabling Guest and Anonymous Accounts in
Supported Windows Operating Systems
NOTE: You must be logged in with Administrator privileges to perform this
procedure.
1
Open the
Computer Management
window.
2
In the console tree, expand
Local Users and Groups
and click
Users
.
3
Click the
Guest
or
IUSR
_system name
user account.
4
Click
Action
and point to
Properties
.
5
Select
Account is disabled
and click
OK
.
A red circle with an X appears over the user name. The account is disabled.
Configuring the SNMP Agent
Server Administrator supports the Simple Network Management Protocol
(SNMP)—a systems management standard—on all supported operating
systems. The SNMP support may or may not be installed depending on your
operating system and how the operating system was installed. In most cases,
SNMP is installed as part of your operating system installation. An installed
supported systems management protocol standard, such as SNMP, is required
before installing Server Administrator. See "Installation Requirements" for
more information.