Users Guide

16 Introduction
•The Dell OpenManage Server Administrator Command Line Interface
User's Guide
documents the complete command line interface for Server
Administrator, including an explanation of CLI commands to view system
status, access logs, create reports, configure various component
parameters, and set critical thresholds.
•The
Dell Online Diagnostics User's Guide provides complete information
on installing and using Online Diagnostics on your system.
•The
Dell OpenManage Baseboard Management Controller Utilities User
Guide
provides additional information about using Server Administrator
to configure and manage your system's BMC.
•The
Dell OpenManage Server Administrator Storage Management User's
Guide
is a comprehensive reference guide for configuring and managing
local and remote storage attached to a system.
•The
Dell Remote Access Controller Installation and Setup Guide provides
complete information about installing and configuring a DRAC III,
DRAC III/XT, and an ERA/O controller, configuring an ERA controller,
and using a RAC to remotely access an inoperable system.
•The
Dell Remote Access Controller Racadm User's Guide provides
information about using the racadm command-line utility.
•The
Dell Remote Access Controller 4 User’s Guide provides complete
information about installing and configuring a DRAC 4 controller and
using DRAC 4 to remotely access an inoperable system.
•The
Dell Remote Access Controller 5 User’s Guide provides complete
information about installing and configuring a DRAC 5 controller and
using DRAC 5 to remotely access an inoperable system.
•The
Dell Embedded Remote Access/MC Controller User's Guide provides
complete information about configuring and using an ERA/MC controller
to remotely manage and monitor your modular system and its shared
resources through a network.
•The
Dell OpenManage Remote Install User's Guide provides information
about unattended, simultaneous provisioning and configuration solutions
over the network by leveraging image-based technology.