Users Guide

Storage Management Service 145
• Export Log File: This task exports the controller log to a text file.
•
Import Foreign Configuration: This task imports virtual disks that reside
on physical disks that have been moved from another controller.
•
Clear Foreign Configuration: Use the clear foreign configuration task to
clear or erase the virtual disk information from the newly attached
physical disks.
•
Set Background Initialization Rate: This task changes the amount of
system resources dedicated to the background initialization task.
•
Set Check Consistency Rate: This task changes the amount of system
resources dedicated to the check consistency task.
•
Set Reconstruct Rate: This task changes the amount of system resources
dedicated to the reconstruct task.
•
Set Patrol Read Mode: This feature identifies disk errors in order to avoid
disk failures and data loss or corruption.
•
Start and Stop Patrol Read: These tasks enable you start a Patrol Read task
or stop a running task when the Patrol Read mode is set to manual.
•
Import/Recover Foreign Configuration: This task imports and recovers
virtual disks that resides on physical disks that are moved from another
controller.
Battery Tasks
The following battery tasks are available when the Battery object is selected.
This task is only available for controllers that have batteries that require
reconditioning. See the Storage Management online help for more
information.
• Recondition Battery: This task fully discharges and recharges the
controller battery.
•
Start Learn Cycle: Use the Start Learn Cycle task to initiate the battery
Learn cycle.
•
Battery Delay Learn Cycle: Use this task to delay the start time of the
Learn cycle for up to seven days.