Users Guide
Remote Access Controller 117
5
Enter the phone number used by the system's modem in the
Phone
Number
field.
6
Enter the user name for the demand dial-out user in the
User Name
field.
7
Enter the password for the demand dial-out user in the
Password
field.
8
Select a setting from the
Authentication
drop-down menu:
•
Any
— Allows the connection using any type of encryption, including
no encryption
•
Encrypted
— Requires the connection to use some type of encryption
•
CHAP
— Requires the connection to use the CHAP
9
Click
Apply Changes
and click
OK
to save your changes.
Configuring the DRAC III Modem Settings
NOTE: You must have Administrator privileges in Server Administrator to use the
Remote Access Controller.
If your DRAC III kit includes the optional PCMCIA modem, you must
configure the modem prior to use.
To configure the DRAC III modem, perform the following steps:
1
Click
System
→
Main System Chassis
→
Remote Access
and then click the
Configuration
tab.
2
Click
Modem
.
3
For
Dial Mode
, choose either
Pulse
or
Tone
.
4
From the
Country Code
drop-down menu, select the country where the
DRAC III is located.
5
For
Initialization String
, enter the required initialization string for the
DRAC III modem in the text field.
6
Select a
Baud Rate
setting from the drop-down menu (the default is
38400
).
7
Click
Apply Changes
, and then click
OK
to save your changes.