User's Manual

90 omconfig: Managing Components Using the Instrumentation Service
config=user id=number enable=true |
false
id=number: ID (in numeric format) of the
user being configured.
enable=true: Enables user.
enable=false: Disables user.
id=number
enableserialoverlan=true |
false
id=number: ID (in numeric format) of the
user being configured.
enableserialoverlan=true: Enables serial
over LAN.
enableserialoverlan=false: Disables serial
over LAN.
NOTE: The enableserialoverlan option is
supported only on PowerEdge x9xx systems.
id=number name=text number: ID (in numeric format) of the user
being configured.
name=text: Name of the user.
id=number newpw=text
confirmnewpw=text
number: ID (in numeric format) of the user
being configured.
newpw=text: New password of the user.
confirmnewpw=text: Confirm the new
password.
id=number
serialaccesslevel=
administrator | operator |
user | none
id=number: ID (in numeric format) of the
user being configured.
serialaccesslevel=administrator: User with
an ID has access privileges of an
Administrator for the serial port channel.
serialaccesslevel=operator: User with an ID
has access privileges of an Operator for the
serial port channel.
serialaccesslevel=user: User with an ID has
access privileges of a User for the
serial port channel.
serialaccesslevel=none: User with an ID
does not have access privileges for the
serial port channel.
Table 4-11. omconfig chassis remoteaccess/omconfig mainsystem
remoteaccess (continued)
name=value pair 1
config=
name=value pair 2 Description