User's Manual

omconfig: Managing Components Using the Instrumentation Service 75
attribute=sata setting=off | ata | raid off: Disables the SATA controller.
ata: Sets the onboard SATA controller to ATA
mode.
raid: Sets the onboard SATA controller to
RAID mode.
attribute=sataport
(0...7) or (A...H)
setting=off | auto off: Disables the SATA port.
auto: Automatically enable the SATA port.
attribute=
secondaryscsi
setting=on | off on: Enables this device.
off: Disables this device.
attribute=serialcom setting=off | on |com1
|com2
off: Disables serial communication setting.
on: Enables serial communication setting
without console redirection.
com1: Enables serial communication setting
with console redirection via COM 1.
com2: Enables serial communication setting
with console redirection via COM 2.
attribute=
serialport1
setting=off | auto | com1
| com3 | bmcserial |
bmcnic | rac | com1bmc
off: Disables serial port 1.
auto: Maps serial port 1 to a COM port.
com1: Maps serial port 1 to COM port 1.
com3: Maps serial port 1 to COM port 3.
bmcserial: Maps serial port 1 to BMC Serial.
bmcnic: Maps serial port 1 to the Baseboard
Management Controller (BMC) NIC.
rac: Maps serial port 1 to the Remote Access
Controller (RAC).
com1bmc: Maps serial port 1 to COM port 1
bmc.
NOTE: This command is valid on PowerEdge
1850, 2800, and 2850 systems only.
attribute=
serialport2
setting=off | auto | com2
|com4
off: Disables serial port 2.
auto: Maps serial port 2 to a COM port.
com2: Maps serial port 2 to COM port 2.
com4: Maps serial port 2 to COM port 4.
Table 4-3. BIOS Setup Settings (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description