User's Manual

56 omreport: Viewing System Status Using the Instrumentation Service
omreport system operatingsystem/omreport servermodule
operatingsystem
Use the omreport system operatingsystem or omreport servermodule
operatingsystem command to display information about your operating
system.
omreport system pedestinations/omreport servermodule pedestinations
Use the omreport system pedestinations or omreport servermodule
pedestinations command to view destinations where alerts for platform events
are configured to be sent. Depending on the number of destinations displayed,
you can configure a separate IP address for each destination address.
Type:
omreport system pedestinations
or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport
servermodule pedestinations command lists each of the valid parameters.
NOTE: The actual number of destinations that can be configured on your system
may differ.
Table 3-7 shows the available settings.
Table 3-7. Settings for the omreport system pedestinations/omreport servermodule
pedestinations
Output Attributes Description
Destination List
Destination Number:
Destination1
Destination IP Address:
101.102.103.104
destination 1: Displays the first destination.
101.102.103.104: IP address of the first
destination.
Destination Number:
Destination 2
Destination IP Address:
110.120.130.140
destination 2: Displays the second
destination.
110.120.130.140: IP address of the second
destination.