User's Manual

34 omreport: Viewing System Status Using the Instrumentation Service

omreport chassis bios/omreport mainsystem bios

Use the omreport chassis bios/omreport mainsystem bios command to view

the current BIOS information. Type:

omreport chassis bios

omreport mainsystem bios

Server Administrator displays the summary of the BIOS information for your

system.

omreport chassis biossetup/omreport mainsystem biossetup

Use the omreport chassis biossetup or omreport mainsystem biossetup

command to view BIOS setup parameters that are normally available only

during system boot.

Type:

omreport chassis biossetup

omreport mainsystem biossetup

Table 3-3 displays the available BIOS setup parameters:

NOTE: All the BIOS Setup parameters are not displayed. Only those BIOS setup

properties configured during system boot are displayed.

Table 3-3. BIOS Setup Parameters

Parameters Description

Bezel Displays whether the bezel removal intrusion check during system

reboot is enabled or disabled.

Bootsequence Displays the device used to boot the system.

Console Redirection Displays if the BIOS screen is redirected over a particular serial port

or if it is turned off.

Console Redirection

After Boot

Displays whether console redirection after system reboot is enabled

or disabled.

Diskette Displays whether the diskette is disabled, auto enabled, or

read-only.

Demand Based Power

Management (DBS)

Displays whether DBS is enabled or disabled on the system.