User's Manual

138 Using the Storage Management Service
omreport Power Supply Status
Table 6-11 describes the syntax for the omreport Power Supply Commands
Table 6-11. omreport Power Supply Commands
Required Command Levels (1,
2, 3) and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for
all enclosures attached to the system.
controller=id enclosure=
<ENCLOSUREID> info=
pwrsupplies
where id is the controller
number and
ENCLOSUREID is the
enclosure number.
For example: controller=0
enclosure=2
Displays the power supplies for the
specified enclosure.
controller=id enclosure=
<ENCLOSUREID> info=
pwrsupplies index=n
where id is the controller
number and
ENCLOSUREID is the
enclosure number and “n” is
the number of a power
supply.
For example: controller=0
enclosure=2 info=
pwrsupplies index=1
Displays the specified power supply.