User's Manual

136 Using the Storage Management Service
omreport Temperature Probe Status
Table 6-9 describes the syntax for the omreport Probe Commands
Table 6-9. omreport Temperature Probe Commands
Required Command Levels
(1, 2, 3) and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for
all enclosures attached to
the system.
controller=id enclosure=
<ENCLOSUREID>
info=temps
where id is the controller
number and ENCLOSUREID
is the enclosure number. For
example: controller=0
enclosure=2
Displays the temperature probes
for the specified enclosure.
controller=id enclosure=
<ENCLOSUREID>
info=temps index=n
where id is the controller
number and ENCLOSUREID
is the enclosure number and
ā€œnā€ is the number of a
temperature probe. For
example: controller=0
enclosure=2 info=temps
index=1
Displays the specified
temperature probe.