User's Manual

omconfig system or servermodule assetinfo: Editing Cost of Ownership Values 117
The following message appears:
Asset information set successfully.
You can enter more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For
an example, see "Example Commands for Adding Acquisition Information."
Adding Extended Warranty Information
Use the omconfig system extwarranty or omconfig servermodule extwarranty
command to assign values for extended warranty information. A warranty is a
contract between the manufacturer or dealer and the purchaser of a system.
The warranty identifies the components that are covered for repair or
replacement for a specified length of time or usage. The extended warranty
comes into force after the original warranty expires. For details on how to edit
warranty values, see "Adding Warranty Information."
Table 5-4 shows the valid parameters for the command.
Table 5-4. omconfig system assetinfo info=extwarranty/omconfig servermodule
assetinfo info=extwarranty
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value
Pair 2
Description
omconfig
system/server
module
assetinfo
info=
extwarranty
cost=<cost> Cost of the extended
warranty service.
enddate=
<enddate>
Date the extended warranty
agreement ends.
provider=
<provider>
Business entity that
provides the extended
warranty service.
startdate=
<startdate>
Date the extended warranty
service begins.