Read me

file:///T|/htdocs/SOFTWARE/svradmin/5.4/en/readme/readme_sa.txt[10/23/2012 1:42:59 PM]
* If you import an invalid root certificate into Server Administrator
using "Preferences-> General Settings-> Web Server-> X.509
Certificate" and try to log in to Server Administrator after
restarting the Web server, you see a blank page.
To correct this issue, restore your original "keystore.db" file
before importing a valid root certificate. To restore the
"keystore.db" file, use both the basic operating system commands
and the Server Administrator CLI. Perform the following steps
from your operating system command line:
1. Type:
omconfig system webserver action=stop
2. Locate the "keystore.db.bak" file. The default path is
"C:\program files\dell\SysMgt\iws\config".
3. Copy "keystore.db.bak" to "keystore.db".
4. Type:
omconfig system webserver action=start
* A temperature that drops below a minimum failure threshold does not
cause a system reset even if this alert action is set.
* A reporting error, for the amount of memory enabled, may exist for
the Level 2 (L2) cache memory when you view "Processor interface"
for PowerEdge 6600 and 6650 systems. It may be incorrectly displayed
as 256 K.
If you purchased more than 256 K of L2 cache with your system, all
of the L2 cache you have installed is fully enabled. The reporting
error will be corrected in a future BIOS release for PowerEdge 6600
and 6650 systems.
* Clicking the browser "Back" and "Refresh" buttons may not display
the correct page with respect to the Server Administrator component
tree, tabs, tab menus, or help as Server Administrator has been
designed with limited functionality to reduce overhead. Full feature
capabilities of the web browser such as "Back", "Refresh", and
"Open in New Window" may not be supported.
Example:
1. Click "Main System Chassis" under "System Component Tree".
2. Click "Fans" under "Main System Chassis".
3. Click "Alert Actions" on the tab menu bar.
4. Click the "Back" button on the browser.