Messages Reference Guide

Storage Management Message Reference 91
2151 Asset tag
changed
Ok / Normal Cause: This alert is for informational
purposes. A user has changed the
enclosure asset tag.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
851
2152 Asset name
changed
Ok / Normal Cause: This alert is for informational
purposes. A user has changed the
enclosure asset name.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
851
2153 Service tag
changed
Ok / Normal Cause: An enclosure service tag was
changed. In most circumstances, this
service tag should only be changed by
Dell™ support or your service
provider.
Action: Ensure that the tag was
changed under authorized
circumstances.
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
851
2154 Maximum
temperature
probe warning
threshold value
changed
Ok / Normal Cause: This alert is for informational
purposes. A user has changed the
value for the maximum temperature
probe warning threshold.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
1051
2155 Minimum
temperature
probe warning
threshold value
changed
Ok / Normal Cause: This alert is for informational
purposes. A user has changed the
value for the minimum temperature
probe warning threshold.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
1051
2156 Controller
alarm has been
tested
Ok / Normal Cause: This alert is for informational
purposes. The controller alarm test
has run successfully.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
751
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Related Alert Information SNMP
Trap
Numbers