Messages Reference Guide

82 Storage Management Message Reference
2118 Change write
policy
Ok / Normal Cause: This alert is for informational
purposes. A user has changed the
write policy for a virtual disk.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
1201
2120 Enclosure
firmware
mismatch
Warni ng /
Non-critical
Cause: The firmware on the EMM is
not the same version. It is required
that both modules have the same
version of the firmware. This alert
may be caused when a user attempts
to insert an EMM module that has a
different firmware version than an
existing module.
Action: Download the same version
of the firmware to both EMM
modules.
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: 2090
853
2121 Device
returned to
normal
Ok / Normal Cause: This alert is for informational
purposes. A device that was
previously in an error state has
returned to a normal state.
For example, if an enclosure became
too hot and subsequently cooled
down, then you may receive this alert.
Action: None
Clear Alert Status: Alert 2121 is
a clear alert for alert 2048.
Related Alert Number: 2050,
2065, 2158
LRA Number: None.
752
802
852
902
952
1002
1052
1102
1152
1202
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Related Alert Information SNMP
Trap
Numbers