Messages Reference Guide

140 Index
140 Index
AC power cord is not being
monitored, 34
AC power cord messages, 34
AC power cord sensor, 7
AC power cord sensor has
failed, 34, 50
AC power has been lost, 35
AC power has been
restored, 35
All virtual disks are missing
from the controller. This
situation was discovered
during system start-
up., 132
An attempt to hot plug an
EMM has been detected.
This type of hot plug is
not supported., 118
An EMM has been
discovered., 115
An EMM has been
inserted., 116
An EMM has been
removed., 116
An enclosure blink has
ceased, 107
An enclosure blink operation
has initiated., 107
An invalid SAS configuration
has been detected., 98
Array Manager is installed on
the system, 87
Asset name changed, 91
Asset tag changed, 91
Automatic System Recovery
(ASR) action was
performed, 14
B
Background initialization
cancelled, 86
Background initialization
completed, 86
Background initialization
failed, 86
Background initialization
started, 85
Bad block extended medium
error, 90
Bad block extended sense
error, 90
Bad block medium error, 90
Bad block replacement
error, 90
Bad block sense error, 90
Bad block table is 80%
full., 119
Bad block table is full. Unable
to log block %1, 119
Bad PHY %1, 116
Battery charge in
progress, 103
Battery charge process
interrupted, 104
battery messages, 55
BIOS Generated System
Events, 52
bios generated system
messages, 52
BMC Watchdog Events, 48
BMC watchdog messages, 48
C
cable interconnect
messages, 55
Change write policy, 82
Chassis intrusion
detected, 26, 47
Chassis intrusion in
progress, 26, 47
chassis intrusion messages, 25
Chassis intrusion returned to
normal, 25
chassis intrusion sensor, 6
Chassis intrusion sensor
detected a non-
recoverable value, 26, 47
Chassis intrusion sensor has
failed, 25
Chassis intrusion sensor value
unknown, 25, 47
Communication regained, 92
Communication timeout, 88
Communication with the
enclosure has been
lost., 115
Controller alarm disabled, 89
Controller alarm enabled, 89
Controller alarm has been
tested, 91