Messages Reference Guide

114 Storage Management Message Reference
2286 A Learn cycle
start is pending
while the
battery
charges.
Ok / Normal Cause: This alert is for informational
purposes.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
1151
2287 The Patrol
Read is paused.
Ok / Normal Cause: This alert is for informational
purposes.
Action: None
Clear Alert Number: 2288.
Related Alert Number: None.
LRA Number: None.
751
2288 The patrol read
has resumed.
Ok / Normal Cause: This alert is for informational
purposes.
Action: None
Clear Alert Status: Alert 2288 is
a clear alert for alert 2287.
Related Alert Number: None.
LRA Number: None.
751
2289 Multi-bit ECC
error.
Critical /
Failure /
Error
Cause: An error involving multiple
bits has been encountered during a
read or write operation. The error
correction algorithm recalculates
parity data during read and write
operations. If an error involves only a
single bit, it may be possible for the
error correction algorithm to correct
the error and maintain parity data.
An error involving multiple bits,
however, usually indicates data loss.
In some cases, if the multi-bit error
occurs during a read operation, the
data on the disk may be correct/valid.
If the multi-bit error occurs during a
write operation, data loss has
occurred.
Action: Replace the dual in-line
memory module (DIMM). The
DIMM is a part of the controller
battery pack. See your hardware
documentation for information on
replacing the DIMM. You may need
to restore data from backup.
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: 2061
754
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Related Alert Information SNMP
Trap
Numbers