Messages Reference Guide

108 Storage Management Message Reference
2264 A device is
missing.
Warni ng /
Non-critical
Cause: The controller cannot
communicate with a device. The
device may be removed. There may
also be a bad or loose cable.
Action: Check if the device is in and
not removed. If it is in, check the
cables. You should also check the
connection to the controller battery
and the battery health. A battery with
a weak or depleted charge may cause
this alert.
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: 2050, 2060, 2070,
2080, 2090, 2100
753
803
853
903
953
1003
1053
1103
1153
1203
2265 A device is in
an unknown
state.
Warni ng /
Non-critical
Cause: The controller cannot
communicate with a device. The
state of the device cannot be
determined. There may be a bad or
loose cable. The system may also be
experiencing problems with the
application programming interface
(API). There could also be a problem
with the driver or firmware.
Action: Check the cables. Check if
the controller has a supported version
of the driver and firmware. You can
download the most current version of
the driver and firmware from
support.dell.com. Rebooting the
system may also resolve this problem.
Clear Alert Number: None.
Related Alert Number: 2048,
2050
LRA Number: 2050, 2060, 2070,
2080, 2090, 2100
753
803
853
903
953
1003
1053
1103
1153
1203
2266 Controller log
file entry: %1
Ok / Normal Cause: This alert is for informational
purposes. The %1 indicates a
substitution variable. The text for
this substitution variable is generated
by the controller and is displayed
with the alert in the Alert Log. This
text can vary depending on the
situation.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
751, 801,
851, 901,
951,
1001,
1051,
1101,
1151,
1201
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Related Alert Information SNMP
Trap
Numbers