Users Guide

Remote Access Controller 109
NOTE: See the Dell Remote Access Controller Installation and Setup Guide for
complete information about installing and configuring a DRAC III, a DRAC III/XT,
ERA, or an ERA/O controller, and using a DRAC to remotely access an inoperable
system. See the Dell Embedded Remote Access/MC Controller User's Guide for
complete information about configuring and using an ERA/MC controller to
remotely manage and monitor your modular system and its shared resources
through a network.
Table 7-1 lists the GUI field names and the applicable system, when Server
Administrator is installed on the system.
Hardware Prerequisites
The managed system must have a DRAC installed to use the Remote Access
Controller.
For a list of specific hardware requirements for your DRAC, see the readme
file for your remote access controller on the Dell Systems Console and Agent
CD and the Dell Remote Access Controller Installation and Setup Guide or the
Dell Embedded Remote Access/MC Controller User's Guide on the Dell
Systems Documentation CD.
NOTE: The DRAC software is installed as part of the Typical Setup and Custom
Setup installation options when installing managed system software from the Dell
Systems Console and Agent CD, provided that the managed system meets all of
your DRAC's installation prerequisites. See the appropriate DRAC documentation
for complete software and hardware requirements.
Table 7-1. System Availability for the Following GUI Field Names
GUI Field Name Applicable System
Modular Enclosure
Modular System
Server module
Modular System
Main System
Modular System
System
Non-Modular System
Main system Chassis
Non-Modular System
BMC
Dell PowerEdge x8xx and x9xx Systems
iDRAC
Dell xx0x Systems