Read me

file:///T|/htdocs/SOFTWARE/svradmin/5.3/en/readme/readme_sa.txt[10/23/2012 1:36:11 PM]
omconfig system webserver action=start
* A temperature that drops below a minimum failure threshold does not
cause a system reset even if this alert action is set.
* A reporting error, for the amount of memory enabled, may exist for
the Level 2 (L2) cache memory when you view "Processor interface"
for PowerEdge 6600 and 6650 systems. It may be incorrectly displayed
as 256 K.
If you purchased more than 256 K of L2 cache with your system, all
of the L2 cache you have installed is fully enabled. The reporting
error will be corrected in a future BIOS release for PowerEdge 6600
and 6650 systems.
* Clicking the browser "Back" and "Refresh" buttons may not display
the correct page with respect to the Server Administrator component
tree, tabs, tab menus, or help as Server Administrator has been
designed with limited functionality to reduce overhead. Full feature
capabilities of the web browser such as "Back", "Refresh", and
"Open in New Window" may not be supported.
Example:
1. Click "Main System Chassis" under "System Component Tree".
2. Click "Fans" under "Main System Chassis".
3. Click "Alert Actions" on the tab menu bar.
4. Click the "Back" button on the browser.
This will take you to the "Fan Probes" page, leaving the tab menu bar
unchanged. The "Fan Probes" page under "Alert Actions" on the tab
menu bar instead of "Fan Probes".
* Selecting the boot sequence under the BIOS "Setup" tab does not
re-enable boot devices that have been previously disabled in
the System Setup Program.
* The links on the Server Administrator home page may lock up after
repeated random clicking. To resolve this situation, refresh the
browser by pressing <F5> or click the browser "Refresh" button.
* All unsecured HTTP requests to Server Administrator receive an
invalid response. Server Administrator runs only one instance of
the Web server, which is secure. Make all connections through
https://<ip address> : <port number>. Any "http://<ip address>:
<port number>" request for connection with the server receives an
invalid response.
* If the browser used with Server Administrator indicates that it
cannot display a page or perform an action, ensure that the browser
is in online mode. To go online, perform the following: