Users Guide

omconfig: Managing Components Using the Instrumentation Service 83

omconfig chassis pwrmonitoring index=4 warnthresh=

325

omconfig mainsystem pwrmonitoring index=4

warnthresh=325.

When you issue the command and the system sets the values you specify, the

following message appears:

Power consumption probe warning threshold(s) set

successfully.

omconfig chassis remoteaccess/omconfig mainsystem remoteaccess

NOTE: This command is applicable to PowerEdge x8xx and x9xx systems only.

Use the omconfig chassis remoteaccess or omconfig mainsystem

remoteaccess command to configure:

• Remote access on a local area network (LAN).

• The serial port for BMC or RAC, whichever is installed.

• The BMC or RAC on a serial over LAN connection.

• Terminal settings for the serial port.

• Advanced settings for a serial over LAN connection.

• Information on a BMC or RAC user.

NOTE: You have to Enter the user ID to configure user information.

Ty p e :

omconfig chassis remoteaccess

omconfig mainsystem remoteaccess