Users Guide

14 Introduction
• Added support for Red Hat
®
Enterprise Linux
®
Version 4.5 (x86_32) and
(x86_64) for AS, ES, and WS editions.
• Added support to configure or report Integrated Dell Remote Access
Controllers’ (iDRAC) Intelligent Platform Management Interface (IPMI)
settings and extended settings for modular servers.
• Added interface to launch the iDRAC and Chassis Management
Controller (CMC) from GUI.
• Added support to display the modular server slot name and the slot
number in the System/Server Module Summary page.
• Added support to display the internal USB device information in the BIOS
Setup and Ports Information page.
• Added support to display Trusted Platform Module (TPM) information in
the BIOS Setup page.
• Added support to disable baseboard management controller (BMC)
automatic system recovery (ASR) when the operating system’s watchdog
timer (WDT) is configured.
• Added support for additional LAN network ports on the motherboard.
• Added support to display embedded hypervisor information in the BIOS
Setup page and Ports Information page.
• Added support to configure the optical drive controller in the BIOS Setup
page.
• Added support to edit Server Administrator user privileges on Red Hat
Enterprise Linux and SUSE
®
Linux Enterprise Server operating systems.
• Added support for iSCSI enablement of Network Interface Controller.
• Added support to configure power monitoring settings.
NOTE: This feature is supported only on Dell systems with PMBus Interface.
• Added support to update inventory for hot pluggable devices. Server
Administrator monitors and updates the inventory information when
plug-and-play USB devices such as CatFish tape drives and SAS disk drives
are attached or detached from the managed system.
• Added support to restrict remote access configuration when DRAC inband
configuration is disabled. When inband configuration is disabled, remote
access functions can be configured only through out-of-band (OOB)
interface.