Users Guide

94 Working With the Baseboard Management Controller
Viewing Basic BMC Information
You can view the basic information about the BMC and also reset the BMC settings to their
default values.
NOTE: You must be logged in with Administrator privileges to reset the BMC settings.
1 Click the System object.
2 Click the Main System Chassis object.
3 Click the Remote Access object.
The
Remote Access page displays the following base information of the system’s BMC:
• BMC Name
• IPMI Version
• System GUID
• Number of Possible Active Sessions
• Number of Current Active Sessions
• IPMI Over LAN Enabled
• SOL Enabled
• IP Address Source
• IP Address
• IP Subnet
• IP Gateway
• MAC Address
Configuring BMC Users
BMC users can be configured using the Remote Access page; this page is accessed by browsing through
the following path.
1
Click the System object.
2 Click the Main System Chassis object.
3 Click the Remote Access object.
4 Click the Users tab.
The
Remote Access Users window displays information about users that can be configured as BMC users.
5 Click User ID to configure a new or existing BMC user.
The
Remote Access User Configuration window allows you to configure a specific BMC user.