Users Guide

68 Instrumentation Service
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want to be performed in the event
that a memory module returns a warning or failure value.
• View current SNMP trap alert thresholds and set the alert threshold levels for memory modules. The
selected traps will be triggered if the system generates a corresponding event at the selected severity level.
Network
Clicking the Network object allows you to manage your system's NICs. Server Administrator monitors
the status of each NIC present in your system to ensure continuous remote connection. The Network
object action window can have the following tab, depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view information about the NICs installed in your system.
Ports
Clicking the Ports object allows you to manage your system's external ports. Server Administrator monitors
the status of each external port present in your system. The Ports object action window can have the
following tab, depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view information about your system's external ports.
Power Supplies
Clicking the Power Supplies object allows you to manage your power supplies. Server Administrator
monitors power supply status, including redundancy, to ensure that each power supply present in your
system is functioning properly. The Power Supplies object action window can have the following tabs,
depending on the user's group privileges: Properties and Alert Management.
Properties
Subtab: Elements
Under the Properties tab, you can:
• View information about your power supply redundancy attributes.
• Check the status of individual power supply elements.