SNMP Reference Guide

Traps 579
Amperage Probe Traps
Amperage probes measure the amount of current (in amperes) that is traversing critical components.
Table 25-6. Amperage Probe Traps
Trap ID Description Severity Cause
Amperage Probe Normal
1202 Current sensor returned to a
normal value
Sensor location: <
Location in chassis >
Chassis location: <
Name of chassis >
Previous state was: <
State >
If sensor type is not discrete:
Current sensor value (in Amps):
<Reading>
If sensor type is discrete: Discrete
current state:
<State>
Information A current sensor on the power
supply for the specified system
returned to a valid range after
crossing a failure threshold. The
sensor location, chassis location,
previous state, and current sensor
value are provided.
Amperage Probe Warning
1203 Current sensor detected a
warning value
Sensor location: <
Location in chassis >
Chassis location: <
Name of chassis >
Previous state was: <
State >
If sensor type is not discrete:
Current sensor value (in Amps):
<Reading>
If sensor type is discrete: Discrete
current state:
<State>
Warning A current sensor on the power
supply for the specified system
exceeded its warning threshold.
The sensor location, chassis
location, previous state, and
current sensor value are provided.