SNMP Reference Guide

Traps 571
Possible memory module event
cause:
<list of causes>
Specifies a list of possible causes for the memory module event,
for example:
Possible memory module event cause: Single bit
warning error rate exceeded
Single bit error logging disabled
Power Supply type:
<type of power
supply>
Specifies the type of power supply, for example:
Power Supply type: VRM
Pre-failure state was: <
State > Specifies the status of the previous memory message, for example:
Pre-failure state was: Failed
Previous redundancy state was:
<
State >
Specifies the status of the previous redundancy message,
for example:
Previous redundancy state was: Lost
Previous state was: <
State > Specifies the previous state of the sensor, for example:
Previous state was: OK (Normal)
Processor sensor status:
<status>
Specifies the status of the processor sensor, for example:
Processor sensor status: Configuration error
Redundancy unit:
<
Redundancy location in chassis >
Specifies the location of the redundant power supply or cooling
unit in the chassis, for example:
Redundancy unit: Fan Enclosure
Sensor location:
<
Location in chassis >
Specifies the location of the sensor in the specified chassis,
for example:
Sensor location: CPU1
Temperature sensor value (in
degrees Celsius):
<
Reading >
Specifies the temperature in degrees Celsius, for example:
Temperature sensor value (in degrees Celsius): 30
Voltage sensor value (in Volts):
<
Reading >
Specifies the voltage sensor value in volts, for example:
Voltage sensor value: 1.693
Table 25-1. Trap Description Reference (continued)
Description Line Item Explanation